Lightwave II+ UV/Vis Spectrophotometer with Built in Printer; Optical arrangement: Split beam, diode array using Gifford optics; Wavelength: 190-1100nm; Bandwidth: 3nm, Modes of operation: Single wavelength in absorbance or % Transmission, Concentration

Specification	Data
Type	UV/Vis
Wavelength Range	190 - 1100nm
Wavelength Accuracy (+/-)	2nm
Wavelength Reproducibility (+/-)	1nm
Lamp Source	Xenon (PTR)
Beam	Split Beam
Optical System	Monochromator Holographic Grating
Bandwidth	5nm (3nm Biowave II+)
Detector	1024 CCD array
Photometric Range	-0.300 to 2.500A
Photometric Accuracy	+/- 0.003A at 0-0.5A at 546nm
Stray Light	0.5%T at 220 & 340nm
Stability	0.01A/h at 340nm
Spectral Scanning	Yes
Measurement Type	Fixed Wavelength (Abs/%T), Abs ratio, concentration (standard curve), concentration (factor), multiwavelength, kinetics, Life Science Methods, cell density
Cell Compatibility	Cuvette 10mm, Microcell* , Ultra Microcell*
Other Sample Containers	n/a
Cell Holder	Single Cell
Accessory Options	Printer*
Temperature Control	None
Method Storage	Up to 90
Regulatory Compliance	CE
Printer	Thermal built in*, External via Export*
Data Output	Print*, Store*, Export to PC*
Display	Graphical LCD
Export/ Data Storage	SD card*, Bluetooth*, USB cable*
Data Interface	USB
Languages	English
Power Requirement	90-250 V AC, 50/60Hz, 30VA
Weight	4.5Kg (9.9lb)
Dimensions (WxDxH)	10 x 26 x 39 cm (3.9 x 10.2 x 15.3 inches)
Certification	CE

Compact and low maintainance
The Biochrom WPA Lightwave combines ease of use with flexibility, and the novel optics require no lid or moving parts  and use a Xenon source for high energy performance with longer lamp lifetime. Compact footprint saves valuable bench space. This instrument has a 2 year warranty and the Xenon lamp has a 3 year warranty. The Lightwave II+ is a higher resolution 3nm bandwidth version.

Powerful and flexible
The instrument includes a large wide view display and in-built software providing flash scan, fixed wavelength measurements, kinetics and concentration with comprehensive graphics capability plus the ability to store up to 90 methods. On peak confirmation is also a feature of the flexible software. Concentration may be measured using either a factor, singlepoint calibration, multi-standard curves or alternatively there is a multi-wavelength mode where equations using absorbance values may be used for ratio calculations. Samples may be measured in 10, 20 or 40mm pathlength cells (glass, quartz or disposable).

Flexible data export options
Results may be printed to an optional integrated high quality graphical printer for a permanent record or exported via a USB connection to a suitable PC running optional Print Via Computer (PVC) software for advanced reporting and data storage or the optional wireless Bluetooth� accessory. Alternatively the optional SD card accessory allows laboratories to export to standard SD or SDHC memory cards. This will be particularly useful to laboratories wishing to clone methods and folders between instruments. Please note that only one optional accessory can be fitted to the instrument.